|
MiniSonic MS20 Out Now |
Only £800 |
The MiniSonic MS20 is a combined oscillator and measuring set in a stand-alone unit, which is both compact and portable. As well as being a quality tester the MS20 is a precision line-up tool, a stereo PPM, a balanced-unbalanced convertor (both ways), a stereo microphone pre-amp, a headphone amp, and a level convertor. Automated measurements can be made through the use of Lindos sequence testing. In as little as 20 seconds, the MS20 will produce a detailed analysis of your audio equipment, and present the results on the OLED display or on your PC.
Features:
 |
Measures level, frequency, phase, frequency and phase response, noise, distortion, crosstalk, path latency and headroom.
|
|
|
Bright OLED display, with 180º viewing angle.
|
|
|
4Hz to 40kHz digitally synthesised generator.
|
|
|
+19dBu out (balanced).
|
|
|
Precision two-channel level measurement with 0.01dB resolution.
|
|
|
Noise and distortion measurement with perceptually based weighting.
|
|
|
 |
|
Lindos standard sequences for fast automatic testing. |
|
|
Displays graphs of frequency and phase response, headroom and noise against time. |
|
|
Internal flash memory storage of sequence results, user settings and presets. |
|
|
Built-in stereo low-noise microphone preamps. |
|
|
Serial computer interface for remote control. |
|
|
Windows support software Lin4WinXP included. |
|
|
Mains/rechargeable battery operation (15 hours) - with built-in charging. |
|
|
Lindos standard sequences for fast automatic testing. |
|
|
Novel tilt-panel case. |
|
|
UniSon interfaces for instant compatibility with both balanced professional and single-ended consumer levels. |
|
|
Stereo PPM display with stereo gain controlled loop-through output. |
|
|
Stereo headphone amp. |
MiniSonic MS10 Upgrades also available |
Only £250 |
Any MS10 can be upgraded to an MS20 simply by fitting a new MS20 front panel.
LA100 Silver Upgrades |
From £350 |
Do you have an original brown LA100?
Do you want to upgrade it to an MK3?
The LA100 silver upgrade is available to all units whatever the vintage. It adds all of the features in the latest LA100 MK3 to an older unit.
|
|
Key Additions Include:
|
New grey panels and buttons.
|
|
|
New labels and chassis’.
|
|
|
New lithium-ion batteries and charger circuit upgrades (sub PCB fitted). See lithium-ion upgrade page for further information.
|
|
|
D-type connectors (instead of DINs) provided for RS232/printer connection (sub PCB fitted).
|
|
|
Toggle switch added to the LA101 allowing easy selection of floating or centre grounded operation. Floating the oscillator allows testing of paths where DC is present (e.g. phantom powered microphone inputs). The oscillator will float up to the DC level and superimpose its AC output on top of the DC.
|
|
|
Full re-calibration and electrical safety testing.
|
|
|
Latest software V6.7
|
|
|
To order a Silver Upgrade, reteturn your unit to the address above. Either provide a purchase order for the upgrades or if your not sure of the total cost wait until we’ve inspected the unit and issued a quotation. Return carriage charges within the UK are £20. Turn around time is approximately 5 days from the receipt of your order.
New Website Launched
The latest member of the Lindos team Designer Cormac Scanlan has worked tirelessly to help bring the Lindos website upto date in time for the launch of the MS20. Using his design skills to give the site a modern look and feel we hope users will find it both easy to navigate and pleasing to
the eye.
The website now features a left hand navigation system, as well as numerous new pages, and new photos taken by Cormac at the Lindos listening room in Lindosland (the home of Pete Skirrow, the company founder and designer of the LA100).
|
|
 |
|
|
